| 产品用途 | 太阳能电池组件的层压 | 节电设备类型 | 工业节能设备 |
SYSC-S系列半自动太阳能电池组件层压机 SYSC-S series semi- automatic solar laminator 电源 Power supply 380V 3相5线（可定制）380V 3 phase 5 wires （Can be customized）温控方式Temperature control mode西门子自整定智能PID控制Siemens self-tuning intelligent PID control抽空速率Pump speed70L/S(可定制)70L/S(customized)加热方式Heating modeSD320导热油加热Heat by SD320 oil工作温度范围Work temperature range 常温～200℃Normal～200℃抽真空时间Pumping time5min（可调），50～20Pa5min（Adjustable），50～20Pa安全系统 Safety system超温安全控制系统，应急开盖系统Temperature exceeding safety control system, Emergency cover opening system.控制方式Control mode西门子S7-200或S7-1200 PLCSiemens S7-200 or S7-1200 PLC 温度均匀性Temperature uniformity±1.5℃，多点控温±1.5℃，multi-point temperature control温度可控精度Temperature control precise≤±0.8℃适用范围Work time可24小时连续运转24 hours continueously层压腔高度 Height of Laminating cavity40mm胶板 Rubber board采用无毒无味耐高温硅胶板Nonhazardous high temperature resist rubber board适应环境 Environment环境温度0-50℃，相对湿度＜90% SYSC-S系列半自动太阳能电池组件层压机采用西门子西门子S7-200或S7-1200 PLC进行控制，并可根据太阳能电池组件不同的工艺要求，设置不同的工艺参数，具有真空度受控制，多点温控的特点。 SYSC-S series semi-automatic solar laminator adopt Siemens S7-200 or S7-1200 PLC as controller. The parameter can be set according to different process requirement of solar module. The feature is vacuum is controllable and the temperature controlled on multi-point.
新闻中心